Few upgrades make a more noticeable change or add more fun to your car audio system than adding a subwoofer system. The car audio fanatics at Rockford Fosgate have made it easy to choose a performance level with their P1, P2 and P3 dual 12-inch 2X12 Loaded Punch Series subwoofer enclosures. Let’s dig into what makes these bass upgrades deliver some of the best bang for the buck on the market.

Custom Enclosure Designed for Car Audio Systems

If you look back at our Test Drive Review of the P500-12P, you might remember that the folks at Rockford Fosgate have a unique approach to car audio subwoofer enclosure design. While most companies perform simulations exclusively in software, the product development team at Rockford Fosgate designs their enclosures to work with the acoustics of the vehicle. This results in physically smaller enclosure designs that offer impressive efficiency and extension without taking up vast amounts of space.

The footprint of the 2X12 series enclosures measures 33.875 by 15.75 inches. To optimize space, the angled rear panel fits up snugly against the rear seats in a coupe, hatchback or SUV. The enclosures are 15.125 inches tall, so they won’t block the view out of the back of your vehicle.

The cabinets are constructed from 5/8-inch MDF with inset side panels. They are finished in a durable high-density black carpet. The front panel features a large-surface-area vent optimized to prevent noise at high volume levels. A custom-tooled trim panel over the vent looks cool and keeps loose objects from entering the enclosure. A set of chromed spring-loaded binding posts on the left side end panel will accept 10-AWG wiring and make it easy to connect the subwoofer system to your amplifier.

Given that the Thiele/Small parameters of the P1, P2 and P3 Punch Series subwoofers are similar, the enclosure options offer similar overall tonal balance but with ever-increasing output capabilities.

Pick Your Poison: Mild to Wild Bass

Rockford Fosgate offers their 2X12-Series enclosures with your choice of Punch Series P1, P2 or P3 drivers. The P1-2X12 includes a pair of P1S4-12 subwoofers, each rated to handle 250 watts of power continuously and 500 watts maximum. Each driver has an Xmax spec of 9 mm, which is good for an affordable subwoofer solution. The system has a net load impedance of 2 ohms and weighs 70.9 pounds. Rockford Fosgate recommends the P300X1 as a great power solution for this enclosure.

If you want more output, step up to the P2-2X12, with its pair of P2D4-12 subwoofers. These subs can handle 300 watts continuously or 600 watts each. The P2 subwoofers have a one-way Xmax spec of 13.3 mm, so this will play louder if you feed it more power. The pair of dual-voice-coil drivers is wired to a net 1-ohm load. The P2-2X12 enclosure weighs in at 77.35 pounds. The P500X1 is suggested as a perfect match for this enclosure. The Punch P2 subwoofers use Rockford Fosgate Vertical Attach Surround Technique (VAST) to optimize cone area. The P2 and P3 12-inch subs have 4% more effective cone area than the P1 drivers.

Rockford Fosgate offers the P3-2X12, which includes a pair of P3D4-12 12-inch subs for the most jam from this enclosure design. These drivers are rated to handle 600 watts continuously or 1,200 watts maximum power per driver. They have an Xmax specification of 15.9 millimeters and are wired to present a 1-ohm load. Paired with an amplifier like the P1000X1bd, this enclosure will shake your behind and rattle your fillings. The P3-2X13 weighs a hefty 89.65 pounds, so you’ll want to get some help if you have to remove it from your vehicle.

You can pair these enclosures with Prime series amplifiers if you’re on a budget or Power series amplifiers if you want improved clarity and detail. Your local Rockford Fosgate retailer can help you create a package that will deliver the performance you want. Use the dealer locator on their website to find a shop near you. Of course, follow the Rockford Fosgate team on Facebook and Instagram to learn about their latest product releases. Also, check out the videos they post on YouTube; they are truly impressive!

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Would you think it was possible to pack a whole slew of technologies into a pair of car audio speakers? For the fanatics at Rockford Fosgate, that tech translates to more output and better sound in your vehicle. In this product spotlight, we’ll take a deep dive into the Punch Series P1650 6.5-inch and the P1694 6×9-inch sets.

Rockford Fosgate P1650 Speakers

Perhaps the most popular speaker size today is the 6.5-inch coaxial. This size fits into hundreds of models of cars and trucks. The Punch Series P1650 set includes a pair of coaxial speakers that feature mineral-filled, injection-molded polypropylene woofer cones and ¾-inch treated PEI dome tweeters. The addition of minerals like mica helps damp resonances to reduce distortion while improving the thermal stability of the cones.

The cone is attached to the basket with a Santoprene rubber surround that will outlast conventional foam designs. The P1650 drivers use the Vertical Attach Surround Method (VAST) to increase the effective radiating area of the driver for more efficiency and bass output. To ensure smooth frequency response, the P1650 set uses -12 dB/octave crossovers concealed within the basket. Rockford Fosgate calls this its Integrated Concealed Crossover (ICC) design. In addition to being neat and tidy, there are no extra modules (external crossover enclosures) for your installer to deal with, so the installation will be quick and efficient.

Choosing speakers that fit your vehicle is as important as selecting ones that sound great. The P1650 speakers feature the FlexFit2 stamped basket design. This design provides eight mounting holes and eight elongated slots to ensure that the speaker can fit a variety of vehicle OEM mounting points. The mounting depth is specified at 2.24 inches. A set of steel mesh grilles is also included.

Wrapping up the specs on these drivers, we have a continuous power handling rating of 55 watts and a max rating of 110 watts. Their nominal impedance is 4 ohms, and they have a sensitivity rating of 88 dB SPL at 1 watt at 1 meter. Sensitivity at this level typically indicates that the suspension design is optimized for sound quality.

Rockford Fosgate P1694

If you have a car or truck with 6×9 speaker locations in the doors or rear parcel shelf and you want to rock out, the four-way P1694 6×9 set is the perfect option. Once again, these speakers include the same mineral-doped polypropylene woofer material as their little brothers and use the VAST surround design for optimized efficiency. These drivers feature a pair of PEI dome tweeters that flank a compact titanium composite cone midrange driver that also includes a rubber surround.

The mounting depth on the P1694 speakers is 3.07 inches, and the drivers include steel mesh grilles and mounting hardware. They can handle 75 watts of power continuously and peaks of 150 watts. Their nominal impedance is 4 ohms, and they have an impressive 91 dB SPL 1W/1M efficiency rating.

It’s worth noting that all of Rockford Fosgate’s speaker and subwoofer specifications fully comply with the CTA-2031 standard for the Testing and Measurement of Mobile Loudspeaker Systems. What does this mean? The dimensions are accurate, and the specifications are entirely believable and uninflated. Not all car audio brands can make this statement.

 

Upgrade Your Vehicle with Rockford Fosgate Punch Speakers

If your car, truck or SUV needs new speakers, drop by your local authorized Rockford Fosgate retailer and ask to audition the Punch Series P1650 and P1694. We’re confident that you’ll be impressed by what you hear. For more information on Rockford Fosgate audio upgrades for cars, boats, motorcycles and powersport applications, visit their website. You can learn about new product releases by following them on Facebook, Instagram and most definitely on YouTube.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Adding a subwoofer to your car audio system is one of the best ways to improve the way your music sounds. If you are looking for a high-quality subwoofer at an affordable price, the Prime Series R2D2-12 from Rockford Fosgate is an excellent choice. This dual-voice coil 12-inch subwoofer is rated to continuously handle 250 watts of power with peaks at 500 watts. Best of all, you know you’re getting a subwoofer that will sound great and deliver clean, clear bass with minimal distortion.

Physical Features of the Rockford Fosgate R2D2-12

The R2D2-12 is based on Rockford Fosgate’s StampCast four-spoke, stamped-steel basket design. The basket design uses large, rolled edges on the windows to add significant structure and ensure that the motor assembly is secure and solid, giving you the benefits of a cast design without the expense.

The basket also features vents in the base where it’s mounted to the top plate. These vents improve power handling and driver linearity by allowing air under the spider to enter and escape around the voice coil as the cone moves forward and rearward. Features like spider venting are usually reserved for much more expensive drivers. There’s also a sizeable cooling vent in the pole piece to allow airflow from under the dust cap for an extra boost in power handling and performance.

The voice coil former is made of aluminum to help extract heat from the dual windings, while most woofers at this price point use plastic. The R2D2-12 has a pair of 2-ohm voice coils that can be wired in series or parallel or driven by separate amplifier channels. If you need a pair of 4-ohm coils on your sub, the R2D4-12 is the answer.

Speaker connections are made via a pair of spring-loaded terminals on each side of the motor assembly, with the voice coil’s tinsel leads sewn to the spider to keep them from slapping the cone or spider at high excursion levels. This is another feature that’s typical of much more expensive subwoofers.

The cone is constructed from injection-molded polypropylene with mica added for improved rigidity and thermal stability. An inverted dust cap in the center of the cone keeps dust and debris out of the voice coil gap. For compliance, the poly-cotton spider uses a linear design and a half-roll, poly-foam surround treated with a UV inhibitor to ensure longevity and reliability. A semi-rigid, injection-molded trim piece on the mounting flange provides a clean look. The connection between the spider, cone and surround has been reinforced with a multipoint high-temperature, high-strength neck joint bonding technique.

Prime-Series Subwoofer Applications

When looking at the Thiele/Small parameters, the first thing that stands out is the Xmax spec of 6.4 mm. Unlike most subwoofers that offer an Xmax calculation based on the height of the voice coil and the top plate, Rockford Fosgate’s specification is based on the measured excursion level that produces less than 10% distortion as measured by a laser-based Klippel transducer analysis system. This method considers compliance and motor strength changes for a much more realistic maximum excursion value. Very few companies are this honest and forthcoming with their specifications – quite impressive.

A second important observation is that the driver is impressively efficient. If you have 250 to 300 watts of power, there’s no sense running a giant subwoofer with a heavy voice coil and cone assembly. Rockford Fosgate has optimized this driver to deliver excellent output from minimal power. This is yet another sign that this company knows exactly what it is doing.

In terms of enclosure design, I modeled the suggested 1.02-cubic-foot sealed and 1.79-cubic-foot vented enclosures in BassBox Pro. These enclosures will deliver impressive output from modest power levels, making them perfect for systems with smaller amplifiers or where the electrical system current draw might be a concern in a hybrid or electric vehicle.

Upgrade Your Car Stereo with a Rockford Fosgate Subwoofer!

If you’re looking for a subwoofer system for your car or SUV, drop by your local authorized Rockford Fosgate retailer and ask about the 12-inch Prime Series R2D2-12 subwoofers. We think you’ll be very impressed with their performance and value. To learn more about Rockford Fosgate’s automotive, powersport, marine and motorcycle products, visit their website. Also, be sure to follow them on Facebook, Instagram and YouTube.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

If the sound system in your car or truck doesn’t put a smile on your face, it’s time to visit your local authorized Rockford Fosgate retailer and ask about the impressive P1000X5 five-channel amplifier. This single-channel amp can dish out an effortless 75 watts of power from the four main channels and up to 500 watts of power to a subwoofer. Best of all, it has all the features your installer needs to connect it to almost any factory-installed audio system. If you aren’t intrigued, you should be! Let’s dive deeper.

A Five-Channel Car Audio Amp Is the Perfect Upgrade

If you’ve ever tried to crank up the volume on your car stereo and it began distorting just as things were getting fun, then you need to upgrade your audio system with an amplifier. The P1000X5 is part of the Punch Series from Rockford Fosgate, so it has all the power, features and sound quality you’d ever want.

Let’s start with the power specifications. The P1000X5 is rated to produce 75 watts by four and 150 watts from the subwoofer channel into 4-ohm loads. When connected to 2-ohm speakers, the maximum power output jumps to 150 by four and 300 for the sub channel. If you want to go all out, your installer can design your subwoofer system to present a 1-ohm load to the mono channel so the amp can produce 500 watts of power. The amp can also be configured for three-channel operation where it can produce 250 watts into a pair of 4-ohm speakers and 500 watts into a 1-ohm subwoofer.

The P1000X5 includes high-pass crossovers on the front and rear channels that are adjustable from 50 to 250 Hz with -12 dB/octave slopes. The subwoofer channel has a low-pass crossover that’s also adjustable from 50 to 250 Hz and a selectable infrasonic filter set to 28 Hz. The front, rear and subwoofer channels have dedicated sensitivity controls that will accept from 150 millivolts up to an impressive 12 volts. The inputs are differential, so they can handle direct connections to low-power source units without the need for an adapter. The amp has dedicated stereo inputs for the front, rear and sub channels, or it can be configured to feed the sub output from the front and rear, or the rear and sub from just the front.

All three sets of channels feature the on-board Punch EQ circuit, designed to correct for acoustical deficiencies in the cabin of the vehicle. Your installer can dial in up to 18 dB of boost at 45 Hz on the sub channel and up to 14 dB of boost at 12.5 kHz on the front channels. The amp also has a provision for the optional Remote Punch Level control to let the driver adjust the relative level of the sub to the rest of the speakers. In addition, the front, rear and subwoofer channels all feature the C.L.E.A.N. Set-Up feature that lets your installer match your source unit to the amplifier and know when the output signal is clipping.

The P1000X5 is 15 inches wide, 7.8 inches long and only 2.4 inches tall. As with the other amps in the Punch series, this amp uses a high-mass cast aluminum heatsink that helps keep things cool while reducing distortion and extending reliability. The amp also features NOMAD protection circuitry that monitors voltages and temperatures to keep the amp safe.

In terms of output device topology, the front and rear channels feature a Class AB design that uses Rockford Fosgate’s proprietary TRANS•ANA configuration to minimize circuit complexity and maximize sound quality. The subwoofer channel is an efficient Class BD design that delivers big power without drawing significant amounts of current from the charging system.

Rockford Fosgate’s Punch P1000X5 – The Perfect Car Audio System Amplifier

One of the most significant benefits of powering your audio system with a five-channel amp is the simplicity of installation. A single-chassis amp doesn’t require multiple power wires or distribution – which can save you a lot of money. Second, five-channel amplifiers typically take up less space than using an amp for the main speakers and a second for a subwoofer.

If you want more performance out of the speakers in your car or truck and are thinking about adding a subwoofer at the same time, drop by your local authorized Rockford Fosgate car audio retailer and ask about the amazing Punch Series P1000X5 five-channel amplifier. You can learn more about this cool amplifier by visiting the Rockford Fosgate website. Be sure to follow their Facebook page, Instagram feed and YouTube channel to learn about the latest audio system solutions for your car, truck, motorcycle or boat.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.